HSMworks (High Speed Machining) - модуль высокоскоростной обработки для SolidWorks. HSMWorks разработана с нуля для работы внутри SolidWorks, и является логическим продолжением параметрической среды SolidWorks в CAM стратегиях.

Год: 2012
Размер: 407 Мб
Разработчик: HSMWorks ApS
Язык интерфейса: Мультиязычный
Таблетка: Присутствует (Team-SolidSQUAD)
Совместимость с Vista: полная
Версия: 2012 R5 Build 32107
Разрядность: 32bit+64bit
Совместимость с Windows 7: полная
Системные требования: Предустановленный SolidWorks 2007-2012 32bit или 64bit


Опытные пользователи SolidWorks будут чувствовать себя как дома работая с HSMWork, и смогут создавать высококачественные программы обработки в течение нескольких минут.

Новые пользователи смогут воспользоваться возможностями 2D и 3D CAD в SolidWorks и воплощать конструкторские и дизайнерские решения в САМ обработку, что приведет к повышению качества проектирования и сокращению времени разработки продукта.

Интерфейс HSMWorks и SolidWorks одинаков для всех пользователей - CAD и CAM. Если вы знаете, SolidWorks, знакомство с HSMWorks будет легким и успешным. HSMWorks дает возможность получения высокой производительности при оптимальной траектории движения интрумента. Для обработчиков, HSMWorks позволяет создавать самые современные, наиболее эффективные CAM программы в более короткие сроки и с наименьшими усилиями.

HSMWorks это CAM система нового поколения, которая способна уменьшить время разработки управляющих программ и время обработки на станке ЧПУ во много раз, относительно существующих CAM систем.

ВНИМАНИЕ!

Если у вас уже установлен HSMWorks 2012 предыдущей версии/билда, отломанный активаторм SSQ, то никаких дополнительных действий по отлому после установки программы НЕ ТРЕБУЕТСЯ!
Для установки очередного билда HSMWorks 2012 сносить предыдущий не нужно, программа установится поверх существующей установки
При удалении активированного HSMWorks вам будет предложено или деактивировать компютер или оставить его активированным- необходимо выбрать последнее, если вы не хотите повторять операцию активации!

HSMWorks 2012 R5.32107 / August 28, 2012 Download
New in this version:
Updated Czech translations.
Fixed problem with editing expressions that could use the wrong unit.
Fixed new line issue when editing notes.

HSMWorks 2012 R5.32059 / August 24, 2012 Download
New in this version:
Added support for custom sized turning and boring inserts.
Added support for pass direction for turning profiling.
Added machining time per operation when simulating.
Added support for operation origin information in the status bar when navigating in the operation manager.
Added support for showing posts by specified mill and turn capabilities when posting.
Added turning tutorial.
Added support for back side facing for turning.
Added simple machining time calcuator available from the right-click menu on the toolpath subitem in the operation manager. You can also open the dialog using CTRL+T when the operation is selected.
Added support for edit expression dialog available from the right-click menu of settings. You can also hit F2 to open the dialog when the setting has focus.
Added new stock colorization mode for climb/conventional milling for show stock in simulation.
Added support for minimum retracts for adaptive clearing.
Added support for showing work offset in operation manager for jobs. The work offset is not shown by default. You can enable this under Preferences -> Operation Manager.
Added support for entry positions for Trace. #5997
Added new options for Manual NC.
Added thread fade out setting for thread turning. When disabled the thread will end with a radial lead out. This setting is not available when "Use cycle" is enabled in which case the CNC control is responsible for the thread lead out.
Added new chamfer turning strategy for chamfering corners.
Added support for tool orientation for turning profile and profile grooving.
Added support for excluding tools from tool renumbering.
Added new settings under preferences for controlling the presented inline information in the operation manager.
Added support for specifying side and tip alignment for the single grooving strategy.
Added support for live toolpath preview for single grooving strategy.
Added support for setting threading length from the front side for turning using "Apply Back From Front" setting under confinement.
Added support for taper threading for turning.
Turning stock preview is now also shown for threading operations.
Added support for live toolpath preview for turning threading.
Added support for live toolpath preview for turning facing and parting.
Added support for removing all unused tools from a document from the tool library.
Added tool renumbering dialog. #5829
Added support for circular milling strategy similar to bore and thread.
Added support for minimum cutting radius for 2D contour/pocket.
Added support for forcing even stepdowns for 2D contour/pocket.
Added new ramp machining strategy intended for finishing steep areas where it is important that the tool is always engaged.
Added support for "Model & Orientation" for WCS in the job. Similar to "Stock & Orientation" but the WCS origin will be associative to the model rather than the stock.
Added support for undercutting for pocket, horizontal, and contour. Lollipop, slot, and dovetail tools are supported.
Updated German translations.
Updated Czech translations.
Updated Center Drill definition in tool library.
Updated Polish translation.
Improved performance of operation manager when creating or loading many operations.
Improved visualization performance for parts with huge toolpath.
Added additional operation information during simulation.
Improved the default operation descriptions.
Updated German translation.
Tool is now shown in red when editing a turning operation and the tool is not compatible with the machining strategy.
Improved handling for incompatible tools when using create derived operation and creating new operations.
Improved parameter relations when re-editing mills and drills in the tool library.
An error is now reported immediately when accepting turning operations and the radii are set incorrectly.
Turning threading has been modified such that cylindrical and conical faces are required for threading. Use confinement to extend machining beyond the faces.
Updated stock transfer cycle support for turning.
Removed boundary and geometry subitems in the operation manager.
Fixed problem with Expand/Collapse All option in operation manager.
Fixed Swarf direction arrow preview which could be wrong in certain cases.
Fixed entering decimal numbers using comma in inch mode without unit.
Fixed turning tip compensation issue.
Fixed problem where "Break Control" and "Manual Tool Change" were not saved.
Fixed potential application crash when using multiple stock solids for stock simulation.
Fixed wrong simulation issue when simulating many operations for stock simulation. #5975
Fixed wrong position issue for turning threading when simulating.
Fixed visible "reverse direction" in job when not using extruded sketch.
Fixed potential turning stock preview issue for job.
Fixed failure to post process when using manual tool change and break control settings in the tool library.
Changes to post processor:
Attached preview images are now only shown for the first pattern instance instead of for each instance for the HTML setup sheet.
Updated generic HAAS turning post for G32 threading support.
Updated generic Heidenhain post.
Added tapping support for the generic Roders post.
Updated generic Dynapath post.
Changes to toolpath generation:
Improved calculation performance for 4-axis swarf.
Entry positions close to the corners now snap to the corners automatically for 2D contour when using sharp corner mode. #6059
Added support for drill positions with "Off" compensation for 2D contour. #5970
Improved toolpath quality for flow. #5936
Fixed automatic synchronization issue for 4-axis swarf. #6064
Fixed potential issue where toolpath would be generated outside of the stock for pocket when using rest machining.
Fixed potential generation failure for adaptive clearing. #6037
Fixed potential tiny passes issue for rest turning. #6012
Fixed wrong direction issue for outside->in ordering for pocket. #6011
Fixed linking issue for swarf.
Fixed missing staydown moves for 2D contour. #5976
Added support for linear leads at corners for sharp corner mode for 2D contour. #5959
Fixed wrong plunge for adaptive. #5938
Fixed 4-axis issue for swarf. #5974
Fixed generation failure for turning. #5946
Fixed potential profile issue for turning. #5935

Скриншоты: